Oliver Legacy Elite II2017, Руководство пользователя

Страница: 83 / 122

74
without unduly interrupting your trip.
Follow the toilet manufacturer’s recommendations supplied with the toilet
for cleaning and maintenance. If you have a toilet that differs from the
description given here, make sure to follow the manufacturer’s advice for
operation.
SHOWERS AND CONTROLS
General
The shower/sink faucet is installed with a 4-foot flexible hose for showering
and for cleaning the shower.
Care of Shower
From time to time you will want to remove soap film from the shower wall.
Use any mild household foam cleaner. Never use harsh chemicals or
abrasives on the shower walls or shower base. After taking your shower,
leave the bath door open to allow the humidity and moist air to escape. Also
leave the bath door open when the unit is not in use. This allows circulation
of air and prevents mildew.
Water Systems Maintenance and Troubleshooting
Your plumbing may develop problems. Most of these problems can be
greatly reduced, if not altogether eliminated, by following a schedule of
planned inspections and maintenance. Neglect of proper maintenance
procedures is the usual cause of most water system problems.
Road vibrations and excessive pressure from some city water sources are the
main physical causes of water system damage. It is important to inspect all
plumbing joints and fittings often for cracks and leaks. Water leaking from a
plumbing joint can cause considerable damage if left unchecked.
There probably is a leak somewhere in the fresh water system if the pump is
running and all the faucets and valves are closed. When the leaking fitting
has been identified, attempt to stop the leak by tightening. DO NOT over
tighten! Plastic fittings rarely need to be tightened with a wrench. If these
fittings leak after tightening, disconnect the fitting and check for dirt, scale
or other foreign substances that may be causing the leak. Clean the fitting
thoroughly and reinstall. If leaking persists, shut off the water supply until