Oliver Hi-Cap N Series Скачать руководство пользователя страница 24 | Manualshive

Страница: 24 / 58

background image

Page | 24

V.

START UP AND OPERATION OF STONER

5.1 INITIAL STARTING PROCEDURES

An experienced Oliver operator should have little trouble starting the
stoner and obtaining good results. However, for many of us, the confusion that
results when the machine is initially turned on defies description. Many of the initial
adjustments must be made soon after material is fed onto the deck. Therefore, it is a
good idea to operate the machine empty for a few minutes prior to attempting to
make a separation. During this period, one should listen to the machine to become
familiar with the way it sounds during operation. Also, observe the oscillating action
of the deck. Change the eccentric speed control to make the deck oscillate faster and
slower.

      Locate the tilt control handle. Loosen the clamps and operate the tilt
control  to  increase  and  decrease  the  tilt  of  the  deck.  Remember  that  tilt  and
eccentric speed must be balanced against each other to create a smooth uniform
bed of material across the  deck.

   Check the feeding mechanism to ensure that you can control the feed rate.
Finally,  increase  and  decrease  air  through  the  deck  with  VFD  air  adjustment.
Although  this  does  not  produce  a  visible  effect  on  an  empty  deck,  changes  in  air
volume may be noted by holding your hand over the deck as the air gate controls are
operated. The air control settings are the most important part of successful stoner
operation.

Before turning the machine off, make one final check to ensure that the
fan shaft is turning in the right direction. When viewed from the main drive belt
side (the belt from the motor to the fan shaft) all shafts should rotate
counterclockwise.

«
...
22
23
24
25
26
...
»

Содержание Hi-Cap N Series



























































Отзывы:

Нет отзывов

Похожие инструкции для Hi-Cap N Series

Бренд: MAHLE Страницы: 21

Бренд: GE Страницы: 43

Бренд: GE Страницы: 37

Бренд: GE Страницы: 210

Бренд: GE Страницы: 160

Бренд: GE Страницы: 146

Бренд: GE Страницы: 6

Бренд: GE Страницы: 27

Бренд: GE Страницы: 4

Бренд: LAHTI PRO Страницы: 20

Бренд: LAHTI PRO Страницы: 16

Бренд: J&M Страницы: 53

Бренд: SAMCHULLY Страницы: 48

Бренд: HAGER WERKEN Страницы: 2

Бренд: Vatech Страницы: 137

Бренд: Vatech Страницы: 68

Бренд: Sable Страницы: 28

Бренд: Maselec Страницы: 6

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды