MODEL 711 COUNTER TOP SLICER
0711S20005-
8
REPLACING THE GAS SPRING (Continued)
WARNING
THE GAS SPRING IS IN A COMPRESSED STATE, USE CARE WHEN
REMOVING IF FROM THE MACHINE.
To remove the gas spring, remove the push-on clip at the top of the gas spring by
prying it off with a screwdriver.
NOTE
The clips are not re-usable; a new one will be required.
After the clip is removed, the gas spring can then be pried off with a screwdriver, use
care noting the above warning. See the next illustration for additional information. At
this point, the shoulder screw securing the opposite end of the spring can be removed
freeing the spring.
Rev. 11-30-00
