Oliver 709 Скачать руководство пользователя страница 38

 

  

GEN 

040228 

 

 
 

WARRANTY 

 

PARTS 
Oliver Packaging & Equipment Company  warrants that if any part of the equipment (other than a part 
not manufactured by Oliver) proves to be defective (as defined below) within two years after 
shipment, and if Buyer returns the defective part to Oliver Packaging & Equipment within two years, 
Freight Prepaid to Oliver Packaging & Equipment’s plant in Grand Rapids, MI, then Oliver Packaging 
& Equipment, shall, at Oliver Packaging & Equipment’s option, either repair or replace the defective 
part, at Oliver Packaging & Equipment’s expense. 
 
LABOR 
Oliver Packaging & Equipment further warrants that equipment properly installed in accordance with 
our special instructions, which proves to be defective in material or workmanship under normal use 
within one (2) year from installation or one (2) year and three (3) months from actual shipment date, 
whichever date comes first, will be repaired by Oliver Packaging & Equipment or an Oliver Packaging 
& Equipment Authorized Service Dealer, in accordance with Oliver Packaging & Equipment’s 
published Service Schedule. 
 
For purposes of this warranty, a defective part or defective equipment is a part or equipment which is 
found by Oliver Packaging & Equipment to have been defective in materials workmanship, if the 
defect materially impairs the value of the equipment to Buyer.  Oliver Packaging & Equipment has no 
obligation as to parts or components not manufactured by Oliver Packaging & Equipment, but Oliver 
Packaging & Equipment assigns to Buyer any warranties made to Oliver Packaging & Equipment by 
the manufacturer thereof. 
 
This warranty 

does not

 apply to: 

1.  Damage caused by shipping or accident. 
2.  Damage resulting from improper installation or alteration. 
3.  Equipment misused, abused, altered, not maintained on a regular basis, operated carelessly, or 
 

used in abnormal conditions. 

4.  Equipment used in conjunction with products of other manufacturers unless such use is approved 
 

by Oliver Packaging & Equipment in writing. 

5.  Periodic maintenance of equipment, including but not limited to lubrication, replacement of wear 

items, and other adjustments required due to installation, set up, or normal wear. 

6.  Losses or damage resulting from malfunction. 
 
The foregoing warranty is in lieu of all other warranties expressed or implied AND OLIVER 
PACKAGING & EQUIPMENT  MAKES NO WARRANTY OF MERCHANTABILITY OR FITNESS FOR 
PURPOSE REGARDING THE EQUIPMENT COVERED BY THIS WARRANTY.  Oliver Packaging & 
Equipment neither assumes nor authorizes any person to assume for it any other obligations or 
liability in connection with said equipment.  OLIVER PACKAGING & EQUIPMENT SHALL NOT BE 
LIABLE FOR LOSS OF TIME, INCONVENIENCE, COMMERCIAL LOSS, INCIDENTAL OR 
CONSEQUENTIAL DAMAGES. 

Содержание 709










































Отзывы: