Oliver 709, Руководство пользователя по эксплуатации и инструкция

Страница: 12 / 41

MODEL 709 MINI SUPREME BREAD SLICER
0709S20030-
2
•
Removing Blade Frames (Cont’d.):
The final step is to remove the shoulder screw from the foot of the blade frame. Once
the shoulder screw is removed the link can be disconnected and moved out of the way.
This will allow removal of the lower blade frame.
•
Replacing Blade Frames:
To replace the blade frames, reverse the removal procedures, (described above). Re-
install both blade frames and check for slice thickness variances. If the spaces between
all blades are not the same see the “Adjustment” section of this manual. If the spacing
is equal, if there is little side to side movement of the blade frames and they move freely
in the tracks, re-connect the links at the foot of each blade frame by re-installing the
shoulder screw. Replace the lockwasher and nut on each shoulder screw and tighten
securely.
Replace the infeed table and secure it in position by installing its four screws. Rotate the
holddown back into the knives and replace and/or tighten their mounting screws.
Replace the table lip making sure it does not rub on the sides of the blades where the
blades pass thorough it. Lastly replace the top and front covers securing them in place
using the four screws previously removed from each.