Oliver 5240, Руководство пользователя

Страница: 27 / 59

27
Oliver 5240 Owner’s Manual
7 T
ROUBLE
-S
HOOTING
Description of Symptoms Possible Cause Corrective Action
Machine will not run No power Check the electrical connections
Emergency Stop button is depressed Release the Emergency Stop button
Breaker/Door handle is turned off Turn the breaker to the ON position
Overloaded thermal relay tripped Reset the thermal relays
Poor surface finish Dull knives Rotate or replace all insert knives
Feed speed too fast Reduce the feed speed
Removing too much material Make two passes instead of one
Material not feeding smoothly Dull knives Rotate or replace all insert knives
Feed speed too fast Reduce the feed speed
Removing too much material Make two passes instead of one
Chipbreaker set too low Raise the chipbreaker
Pressure bar set too low Raise the pressure bar
Snipe at the beginning or end Bed rollers set too high Adjust bed rollers
of boards Chipbreaker improperly set Adjust chipbreaker
Pressure bar improperly set Adjust pressure bar
Trouble-Shooting