Oliver 5018, Руководство пользователя

Страница: 9 / 52

6
GENERAL SAFETY RULES FOR
WOODWORKING MACHINERY (2)
15.
Maintain machine in top conditions. Keep machine clean for best and
safest performance. Follow instructions or lubricating and changing
accessories.
16.
Disconnect machine form power source. Before servicing and when
changing accessories, or when mounting and remounting motor.
17. Avoid accidental starting. Make sure switch is in the "off" position before
plugging in power cord.
18. Use recommended accessories. Consult the operation manual for
recommended accessories.
19.
Check damaged parts. Before further use of the machine, a guard or other
part that is damaged should be carefully checked to make sure that it will
operate properly and perform its intended function. Check for alignment of
moving parts, binding of moving parts, breakage of parts, mounting, and
any other condition that may affect its operation. Guards or other parts
that are damaged should be properly repaired or replaced.
20. Never leave machine running unattended. Turn power off. Do not leave
the machine until it comes to a complete stop.
21.
Do not use machine while under the effects of drags, alcohol, or any
medication.
22. Always wear a face or dust mask if operates a lot of saw dust and or wood
chips. Always operate the machine in a well ventilated area and provide
for proper dust removal. Use a wood dust collection system whenever
possible.
WARNING
Do not attempt to operate until you have read
thoroughly and understood completely all
instructions, rules etc. contained in this manual.
Failure to comply can result in accidents involving
fire, electric shock, or serious personal injury. Keep
this operation manual and review frequently for
continuous safe operations.