Oliver 501, Руководство пользователя по эксплуатации и инструкция

Страница: 15 / 33

501_502
0502S20007 6-1
MAINTENANCE
DANGER
ALWAYS DISCONNECT THE GRILLE FROM THE POWER SUPPLY BEFORE
ATTEMPTING ANY TYPE OF MAINTENANCE TASK,
CAUTION
COOKING SURFACES ARE HOT USE CARE WHENEVER WORKING NEAR THEM.
ALLOW SUFFICIENT TIME FOR COOLING BEFORE BEGINNING MAINTENANCE.
Top Platen Assist Spring Adjustment
To allow adjustability in the amount of force required to raise or lower the top platen a
drag block has been added to each top platen hinge pin. Using a screw driver, a screw
can be adjusted to increase or decrease the drag on the hinge pin. Increasing the drag,
(turning the screw clockwise), will restrict the movement of the top platen’s handle.
Rotating the screw counter clockwise will free the movement of the platen allowing it
drop from higher positions but pop up when at the lowest position. If you wish you may
make this adjustment to fit your needs. The screw is assessable from the rear of the
machine through the spring cover. Periodic adjustment of this screw may be necessary.
Cleaning
WARNING
HOLD THE TOP PLATEN OPEN WHILE CLEANING IT TO
PREVENT ACCIDENTAL CLOSURE.
As Required Cleaning:
We recommend the scraping of the top and bottom cooking surfaces, with the scraping
tool provided, between each load to minimize excessive carbon buildup on the cooking
surfaces. Excessive carbon buildup will decrease the cooking surface’s efficiency,
negatively affecting grille performance.
As necessary throughout the day empty the front grease tray. It can be hand washed in
a normal dish cleaning solution or placed in a dishwasher.
Continued