Oliver 4430 Скачать руководство пользователя страница 19 | Manualshive

Страница: 19 / 65

Oliver 4430 Скачать руководство пользователя страница 19

4430 Planer

OLIVERMACHINERY.NET

19

|

Page

Receiving

Your shipment should come with one wood crate. Upon receiving your shipment, check for any significant

damages before signing the delivery confirmation.

CAUTION

You may need to remove strapping that is used for securing your package.

Strapping may spring back violently when released and cause injury. Always wear

safety goggles and gloves for this task.

Moving Machine into the Shop

Your machine will be delivered by freight service, and it will be left outside of your workshop by default.

On the day of delivery, please be sure help is available to move the machine to its final location.

WARNING

4430 Planer has a gross weight of 625 lbs. and a net weight of 546 lbs.

Safe moving techniques and proper lifting equipment required, or serious personal

injury may occur.

WARNING

Your shipment may be secured by the straps. Do not lift your shipment by the

strap. They are not designed to hold the total weight of your shipment. They may

snap without warning and cause serious injury and machine damage.

Unboxing

Upon removing the crate cover, you should find a planer that is mostly assembled, and three paper boxes

that contain all the accessories. Everything is covered by a plastic bag.

IMPORTANT

If items are damaged, please call us immediately at

1-800-559-5065

«
...
17
18
19
20
21
...
»

Содержание 4430


































































Отзывы:

Нет отзывов