Oliver 4420, Руководство пользователя, Страница: 6 / 25

6
16” PLANER
Thank you for choosing this planer.
This unit is carefully tested and inspected before
shipment and if properly used and maintained, will
provide you with many years of reliable service. To
ensure optimum performance and trouble free
operation a reasonable amount of care and attention is
required. To get the most from your new planer, please
take the time to read this manual before assembling,
installing and operating the unit.
UNPACKING AND CLEANING
To ensure maximum performance from your 16" planer,
clean it properly; and install it accurately before use. As
soon as you receive the planer, we recommend you
follow these procedures:
1. Remove the contents of the shipping container.
2. Report damage, if any to your local distributor.
3. Clean all rust protected surfaces with a mild solvent
or kerosene. Do not use lacquer thinner; paint thinner,
or gasoline. These will damage painted surfaces.
4. To prevent rust, apply a light coating of paste wax to
surface.
CARRIAGE
The planer has four lifting handles (A), that can be
pulled out when needed. (Fig.1)
USING A SLING
When using a sling to carry machine, lifting handles
must be pulled out (Fig.2). Try keeping sling parallel to
machine and hold steady.
MAGNETIC CONTACTOR CURCUIT
FIG.3
- Single phase motor
- Power source: A,C in put
- Motor source : A,C, out put
- Grounding: D
Fig. 1
Fig. 2
Fig. 3