Oliver 4420, Руководство пользователя, Страница: 16 / 25

14
DIGITAL READOUT
The digital scale equipped with 16” planer can serve
many applications, however for wood planning we
need only concern ourselves with the ON/OFF,
SET, and mm/in buttons. When set properly the
digital readout will display the thickness of the finished
product.
Calibration:
In order to calibrate the unit first run a
board through the planer and measure the finished
thickness with a set of Vernier calipers. This is the
number to be entered into the display unit. At this point
turn the unit on by pushing the ON/OFF button. Now
press the mm/in button to set the unit to American
standard or the metric system.
1. Press and hold the SET button until the ‘+’
sign starts to flash and immediately release A it.
2. Cycle the set button by pressing it until the ‘+’ sign
remains on.
3. Press and hold the SET button until the second
zero to the right of the ‘+’ plus sign starts to flash
and immediately release it.
4. Cycle the SET button by pressing it until the
number reads the correct whole number taken with
the vernier calipers and immediately release the
button.
5. Press and hold the SET button until the zero to the
right of the decimal point starts to flash.
6. Repeat steps 4 and 5 until the last digit in the 0.001
place is entered.
7. Press and hold the SET button until the SET
on the display starts to flash and
immediately release it.
8. Press and release the SET button one final time to
complete the calibration.
Note: Do not turn the device off. If you do you
will have to re-calibrate the unit.
Battery: When the display begins to flash the
battery should be replaced. The battery is to be
replaced with a SR144 (or equivalent) and can be
found at most pharmacies or grocery stores. When
replacing the battery the positive side of the button
cell must face out.
Fraction Decimal Metric
1/32 0.031 0.794
1/16 0.063 1.588
3/32 0.094 2.381
1/8 0.125 3.175
5/32 0.156 3.969
3/16 0.188 4.763
7/32 0.219 5.556
1/4 0.250 6.350
9/32 0.281 7.144
5/16 0.313 7.938
11/32 0.344 8.731
3/8 0.375 9.525
13/32 0.406 10.319
7/16 0.438 11.113
15/32 0.469 11.906
1/2 0.500 12.700
17/32 0.531 13.494
9/16 0.563 14.288
19/32 0.594 15.081
5/8 0.625 15.875
21/32 0.656 16.669
11/16 0.688 17.463
23/32 0.719 18.256
3/4 0.750 19.050
25/32 0.781 19.844
13/16 0.813 20.638
27/32 0 . 844 21.431
7/8 0.875 22.225
29/32 0.906 23.019
15/16 0.938 23.813
31/32 0.969 24.606
1 1.00 25.400