Oliver 1808-CE, Руководство пользователя по эксплуатации и инструкция

Страница: 16 / 63

1808-CE
1808S20019 5-3
(
“OPERATINTING THE MACHINE “ CONTINUED
)
The conveyor can be run while the heated roll
“ON/OFF” switch is in the “OFF” position.
This allows for cleaning the conveyor without having the heat seal on. It is also a good
idea to unplug the machine when it will not be used for a lengthy period of time.
The
“RESET” switch is used to reset the machine if the guard interlock switch has been
tripped or the E-Stop button is pressed. When this situation occurs, the
“RESET” switch
lights up indicating that one of the switches has been has activated. Set the guard back
to its proper position, make sure E-Stop button is released (turn anti-clockwise), then
push the
“RESET” switch to resume operation. If the guard has been repositioned
properly, and E-Stop button is released (turn anti-clockwise), then
“RESET” switch is
pressed, the light on the switch will go out. The guard can be removed by pushing
forward on the handle and lifting up and out. To replace the guard, drop the guard
fingers into the notches and pull the handle so the interlock engages. See the photo
below for the location of the guard and interlock switch.
`
HEAT SEAL
ENTRANCE GUARD
GUARD
INTERLOCK
SWITCH
GUARD
FINGERS