OLIVER
IGD
OLIVER
IGD
The SET 4-20mA BOARDS command
As an option 4-20mA signal output cards can be added to the system. When added these
provide a linear 4-20mA output for any specified input channel connected to the system. The
cards are 4 port devices and up to 4 cards can be added. The following sequence of menu’s
show how to input and configure the cards to the required operation
Set Num. Boards
0
Use the jog wheel to input the number
of 4-20 cards to be fitted. Up to three
additional cards can be added.
Note these can be mixed on the
expansion port with relay cards in any
sequence.
Optional 4-20mA boards fit to the
expansion connector. More
boards are then added in line as
indicated in the diagram below.
NOTE 4-20mA output boards
must be fitted after any relay
output boards.
In Out
In Out
4 Channel
4-20mA Analogue
Output Card
P/N 5074601
4 Channel
4-20mA Analogue
Output Card
P/N 5074601
Page 40 of 52
