PAGE 6
Repeat the procedure with the other bed
end and tighten all the connections screws.
6.
A.
D.
D.
J.
B.
Connect 1 sidepiece (H.) on the rearmost
part of the bedside.
Before tightening the nuts for the threads
in the mounting holes (15.) – (picture 1.),
you must connect the back bar (F.) with
the large connection screws (18.) and the
connection nut (14.)
After this you mount the lower panel (I.)
with the large connection screws (18.) and
the connection nut (14.).
Insert the connection nut (14.) while the
lower panel (I.) is placed on the floor /
underlay (picture 2.).
NOTE.
The connection screws are still NOT
completely tightened.
7.
H.
F.
I.
NOTE
Through hole
→
Figure 1.
Figure 2.
16.
5.
15.
14.
I.
NOTE
No hole
↓
