PAGE 5
Place 2 corner posts (D.), 1 end board piece
(A.) and 1 short bars (B.) on the underlay.
The mounting holes must turn upwards on
the end board piece (A.). The end board
piece (A.), the short bars (B.) the lower
panel (J.) must all be in place before assem-
bling.
2.
A.
D.
D.
J.
B.
NOTE
Through hole
→
Mount the ”half-moon” washer (16) and
the nut for the thread (15.) in the mount-
ing hole on the end board piece (A.).
3.
16.
5.
15.
Mount the upper short bars (B.) to the
corner posts (D.) with the connection nuts
(14.) and the large connection screws (18.)
with the matching washers (8. -7.).
4.
The lower panel (J.) is now mounted with
the corner posts (D.). Use the connection
nuts (14.) and the large connection screws
(18.) with matching washers (8.-7.).
5.
B.
D.
J.
14.
18.
8. 7.
NOTE
No hole
↓
Mounting hole
→
