Olive Nexus V-R9, Руководство пользователя

Страница: 45 / 47

45
2. Why my wireless client can NOT access the
Internet?
Note:
Establish WiFi Connection. As long as you select either
WEP
or
WPA-
PSK
encryption, ensure encryption settings match your WiFi settings. Please
refer to your WiFi adapter documentation for additional information.
Ensure that the wireless client is associated and joined with the correct Access
Point. To check this connection, follow the steps below:
1.
Right-click
on the
Local Area Connection icon
in the taskbar.
2.
Select
View Available Wireless Networks in Wireless Configure
. Then
Connect to Wireless Network
screen appears. Ensure you have
selected the correct available network.
Ensure the IP Address assigned to the wireless adapter is within the same
subnet as the Access Point and gateway. The OliveNexus | V-R9 has an IP
Address of
192.168.123.254.
Wireless adapters must have an IP Address in the
same range (e.g., 192.168.123.x). Although the subnet mask must be the same
for all the computers on the network, no two devices may have the same IP
Address. Therefore, each device must have a unique IP Address.
To check the
IP Address
assigned to the wireless adapter, follow the
steps below:
1. Enter ipconfig /all in command mode
2. Enter ping 192.168.123.254.to check if you can access the Olive
Nexus | V-R9
3. Why does my wireless connection keep
dropping? You may try following steps to solve it.
• Antenna Orientation.
1: Try different antenna orientations for the Olive Nexus | V-R9.
2: Try to keep the antenna at least 6 inches away from the wall or other
objects.
• Try changing the channel on the Olive Nexus | V-R9, and your Access Point
and Wireless adapter to a different channel to avoid
interference.
• Keep your product away (at least 3-6 feet) from electrical devices that
generate RF noise, like microwaves, monitors, electric motors, etc.
4. Why I am unable to achieve a wireless connection?
Note:
An Ethernet connection is required to troubleshoot the Olive Nexus | V-R9.
If you have enabled Encryption on the Olive Nexus | V-R9, you must also enable
encryption on all wireless clients in order to establish a wireless connection.
• For 802.11g, the encryption settings are: 64 or 128 bit. Ensure that the
encryption bit level is the same for both the Olive Nexus | V-R9, and your
Wireless Client.
• Ensure that the SSID (Service Set Identifier) on the OliveNexus | V-R9 and
the Wireless Client are exactly the same.
If they are not, your wireless connection will not be established.