Olimpia OC 1280 P, Быстрый старт, Страница: 17 / 20

17
IP C
AMERA
OC 1280
APPENDIX
Troubleshooting
I cannot register the receiver on the alarm system.
Check all the cable connections. Observe the information
in Section Connecting the Camera on Page 9 .
Read the relevant information in the operating manual
supplied with the alarm system.
Reset your camera to its default factory settings. Use a
thin object to press in the opening on the rear of the cam-
era for approx. 10 seconds. Ensure that the user identifier
and password correspond to the default settings.
My camera is not detected within the network.
Check all the cable connections. Observe the information
in Section "Connecting the Camera".
Check the network settings on the router. The DHCP
function must be activated in the router settings. Your
camera can only be found automatically in the network
when the DHCP function is switched on.
Reset your camera to its default factory settings. Use
a thin object to press in the opening on the rear of the
camera for approx. 10 seconds. Ensure that the user
identifier and password correspond to the default
settings.
More answers to frequently asked questions are provided in the
Support section of our website at www.olympia-vertrieb.de