Olimpia OC 1280 P, Быстрый старт, Страница: 11 / 20

11
IP C
AMERA
OC 1280
CONNECTING THE CAMERA
Connecting the Camera - Network Cable
Connect the network cable to the network connection
port on the camera and a free network connection port
(LAN) on the router.
A condition for starting up the camera is the
assignment of a unique IP address within your
network. The DHCP function completes this
automatically. In the case of most routers, the
DHCP function is activated in the standard set-
tings. For more information, please refer to the
operating manual supplied with your router.
1
Connect the network cable to the port on the
connection cable and a free network connection port
on the router.
2
Wait about 60 seconds until the router has automat-
ically assigned an unambiguous IP address to the
camera.
One LED on the network connection port signals
when a connection exists to the network (lights up
orange) and the other that data is being transmit-
ted (flashes green).
Last Steps Prior to Assembly
Disconnect all the cable connections before beginning
with the installation work.
1
Disconnect the power adapter from the power
socket.
2
Disconnect the network cable from the port on the
connection cable.
Determining the Installation Location
You can install the camera at any installation location (e.g.
under a roof projection or on a ceiling) with the aid of the
device mounting bracket.
Observe the following points when selecting the assem-
bly location.
■ The camera must be installed at a suitable height to
ensure the camera and connection cable are protect-
ed from unauthorised access by third parties.
■ The camera must be within the range of the wireless
home network (WLAN/Wifi).
■ There must be sufficient space to install the cable box
in the direct vicinity.
■
The power socket, which is located indoors, must be
easily accessible.
■
(Option) The receiver must be within range of your
alarm system.