5/622/7410 (13)
Starting up
9
■
■
■
■
Printer
Caution:
Observe the following information to ensure long, trouble-free operation:
−
Never
- print when no paper is inserted.
- pull the paper when the printer is in operation.
- use poor quality paper.
- reuse a paper roll.
- manipulate the printer mechanism with hard objects or move by hand.
−
Do
- pay attention to the end of paper markings. Change the paper roll immediately.
- have the cash register/printer serviced regularly by an authorized service center.
■
■
■
■
Insert paper roll
1. Connect the machine power supply.
E PO
is shown on the
display and the alarm is active.
2. Press
!
-key to clear the alarm.
3. Open the printer lid.
4. Turn the key-operated switch to
R.
5. Insert the paper roll (58 mm wide) for the receipt in the
paper holders. The end of the paper roll must be at the
bottom. Feed the paper above the paper end sensor as
shown in the illustration below.
6. Feed the end of the paper roll, cut straight, into the printer
and press
"
. Depending on roll used, feed the paper
past the tear-off edge on the printer lid (receipt) or onto the
take up spool.
7. If the paper is not transported straight remove the printer
cover, pull the paper release lever upwards, align the
paper correctly, lower the paper release lever again and
close the printer cover.
8. Close the printer lid.