Error Messages
5/622/7410 (13)
36
Error Messages
Error messages, operation
Error messages appear in the display and an acoustic signal is issued as a result of
incorrect operation.
!
Error message is cleared
Error Message
Cause
E00
Incorrect key pressed
E01
Incorrect key operation sequence
E02
A number/digit sequence (with decimal point) must be entered
or the entry is too long
E03
Result exceeds permitted number of digits or is zero
E10
Incorrect key pressed
E20
Card payments related to negative values are not accepted
E32
PLU number in the registration outside the range
E41
Error while testing RAM size
E42
The operation accepts the input of a zero
E60
The item barcode is valid but not found in the PLU database
E64
The PLU index is outside the range
E72
Wrong password entry
E81
The item barcode was not found / recognized
E89
Cash paid out amount is higher than cash in drawer
E90 PRN-J
Printer fault (jam)
E91 PRN-F
Printer memory is full
PRN-H
Printer overheated. Clear alarm by pressing
!
, the
printer then stops. Printing is automatically continued when
the printer has cooled down again.
PRN-H
is also displayed
Printer error
In case of a printer error, switch the cash register off immediately and disconnect the
power plug.
Check that the paper roll is correctly inserted, whether the paper is damaged or
objects have fallen into the printer mechanism.
Remove them if they have.
Caution:
Remove any objects very carefully. Do not use knives, screwdrivers or similar
tools to help. Never use force. This may damage the printer mechanism.
Switch the cash register on again and carry out a new registration.
If a printer error occurs again, contact the service centre.