16
Features
Protection and refinement of your documents.
Laminate photographs, documents, graphics, identity cards etc. up to A3
size. The unit operates using 2 heating rollers, has a quick warm-up phase
and laminates without a carrier.
•
2 LED lamps indicate the operating states “Cold laminating ready”
and “Hot laminating ready”
•
Automatic switch-off in the event of overheating
•
High quality heating system prevents smudging and blistering
•
Warm-up phase only about 3 – 5 minutes
•
Cool down phase to room temperature, approx. 30 minutes
•
Foil thickness, minimum 75
μ
m and maximum 125
μ
m
Laminating system:
Hot roller technology
Working width:
332 mm (A3)
Laminating temperature (COLD),
(HOT)
35 °C,
97 – 105 °C
Maximum laminating width:
332 mm
Warm up period:
3 – 5 minutes
Maximum foil thickness:
75 – 125 micron
Laminating speed:
300 mm/min
Power supply:
220 – 240 Volt, 50 Hz
Current consumption:
1 A
Power consumption:
200 VA
Dimensions (LxWxH):
466 x 108 x 76.50 mm
Weight:
Approx. 1400 g
Hot Laminating
1
Connect the power cable to an easily accessible, standard electrical
socket.
Caution:
Check that the voltage specifications of the unit correspond
to that of your power supply network (220 – 240 V, 50 Hz).
2
Switch on the On/Off switch on the top, right-hand side of the unit:
HOT
3
The drive motor for the transport rollers starts up. The warm-up phase
begins. The correct operating temperature is reached after about
3 – 5 minutes and the red indicator lamp lights up.
