Olimpia splendid DOLCECLIMA, Инструкция по установке, использованию и техническому обслуживанию, Страница: 63 / 284

DOLCECLIMA
ENGLISH
EN - 19
2.3 - MObILE INSTALLATION
The air conditioner must be installed in a suitable environment.
It is recommended to reduce solar radiation through curtains, Venetian blinds and to keep doors and windows
closed.
a. Position the air conditioner in front of a window or French window.
b.
insert the lexible hose (1) terminal on the air outlet grid of the appliance (26) as shown in igure 8.
c.
Fold the conveyor (2) end back on itself and insert it into the lexible hose (1) (ig.9).
d. Position the terminal (2) in such a way as to make air exit to the exterior (Fig.10)
Extend the pipe only to the necessary extent, so that the air conveyor remains closed between
the ixture shutters. (Fig.10)
2.4 - FIXED INSTALLATION
The air conditioner can also be installed with ixed holes in windows or walls.
Air low must not be obstructed by protective mesh or similar.
Any forms of protection must have a total cross-section for air low of not less than 140 cm
2 .
a. Make a hole with diameter of 135 mm in the glass or wall, at a height from the ground between 300 and
1350 mm (Fig.11).
b.
Position the lange (3) on the hole in the wall and mark the drilling points. (Fig.12)
c.
Remove the lange (3) and make 6 mm holes. (Fig.13)
d. Insert plugs (10) into the holes. (Fig.13)
e.
Position the lange (3) on the hole in the wall and ix it using three screws (11). (Fig.13)
f.
insert the end of the lexible hose (1) onto the air outlet from the appliance (26) as illustrated in igure 8.
g.
Connect the other end of the lexible hose (1) onto the lange (3)
(Fig.14).
h.
Remove the lexible hose (1) of the lange (3)
and close the latter with the cap (4) when the equipment
is not running (Fig.15).