Olimpia splendid DOLCECLIMA ARIA 8, Инструкция по эксплуатации и техническому обслуживанию

Страница: 55 / 220

DOLCECLIMA ARIA 8
ENGLISH
EN - 19
2.3 - MOBILE INSTALLATION
The air conditioner must be installed in a suitable environment.
It is recommended to reduce solar radiation through curtains, Venetian blinds and to keep doors and windows
closed.
a.
Position the air conditioner in front of a window or French window.
b.
Position the machine side terminal (2) on the flexible hose (1) as shown by Fig.8.
c.
Position the terminal (5) on the opposite side of the flexible hose (1) (Fig.8).
d.
Insert the machine side terminal (2) on the air outlet grid of the appliance (26) as shown in figure 9.
e.
Position the terminal (5) in such a way as to make air exit to the exterior (Fig.10)
f.
If you possess a sliding window (vertical or horizontal) or a shutter, it is possible to use the supplied
“SLIDER KIT” (4) which allows a more efficient installation.
For the installation with KIT SLIDER, proceed as shown in figures 11a and 11b.
Extend the pipe only to the necessary extent, so that the air conveyor remains closed between
the fixture shutters.
2.4 - ELECTRICAL CONNECTION
The appliance is fitted with a power cable with plug.
Before connecting the air conditioner ensure that:
• The voltage and power frequency values match those specified on the
appliance plate data.
• The power line is equipped with an effective earth connection and is
correctly sized for maximum power consumption of the air conditioner.
• The appliance’s power network must be equipped with a suitable omnipolar disconnection device com-
pliant with national installation regulations.
• The appliance is powered solely through a socket compatible with the plug provided.
CAUTION
Any replacement of the power cable must be carried out solely by Olimpia Splen-
did technical support or by similarly qualified personnel.
2.5 - DRAINAGE
Depending on the modality of use of the appliance, it is necessary to connect the condensation discharge pipe.
2.5.a - Use as dehumidifier
For the correct use of the appliance, work as follows (figures 12 and 13):
a. Remove the cap (28).
b. Insert the pipe (7) in the connector.
Make sure the end of the discharge pipe (7) is positioned on a drain well or in a container.
Make sure the pipe (7) is not clogged.