Olimpia splendid DOLCECLIMA AIR PRO, Инструкция по эксплуатации и техническому обслуживанию, Страница: 56 / 424

EN - 18
ENGLISH
3.7 - TURBO COOLING MODE
• This function can be activated only from the control panel of the appliance.
a
. This mode can be selected by pressing key “ MODE ” once or more on the control panel until the icons
and “
Turbo
” appear on the display.
b . The function sets the appliance directly to cooling mode with a temperature of 17°C and maximum speed
of the fan in order to reach the set temperature more quickly.
c . In this mode it is not possible to select either the fan speed and the temperature.
d
. To switch off the function, press key “
MODE
” on the control panel or switch off the appliance.
3.8 - DEHUMIDIFICATION MODE (DRY)
a . When this mode is selected, the appliance dehumidifies the environment.
This mode can be selected by pressing the key “ MODE ” once or more (on the remote control or on the
control panel) until when the specific icon appears:
- on the control panel - on the remote control display.
b
. In
DRY
mode, it is not possible to select the fan speed or to adjust temperature.
The fan motor works at low speed.
c
. Keep doors and windows closed to achieve the best dehumidifying effect.
Do not
place the air outlet pipe out of a window.
d
. Connect the condensation discharge pipe (paragraph 2.6.a)
3.9 - VENTILATION MODE (FAN)
a . When this mode is selected, the appliance doesn’t perform any action both on temperature or on air
humidity in the environment, but only maintains it in circulation.
b . This mode can be selected by pressing the key “ MODE ” once or more (on the remote control or on the control
panel) until when the specific icon is shown on the display of the control panel and/or of the remote control.
- icon on the control panel - icon on the remote control display
c
. In this mode, the fan is always switched on and it is possible to select its desired speed by pressing the
key “ FAN ” on the remote control or the key on the control panel.
d . The fan speed is displayed as indicated in paragraphs “3.1” (point SW7) and “3.2” (point D7).
3.10 - HEATING MODE (HEAT)
(only for version with heat pump)
a
. When this mode is selected, the appliance heats the environment.
b
. This mode can be selected by pressing the key “
MODE
” once or more (on the remote control or on the
control panel) until when the specific icon
is shown on the display.
c
. In this mode, the fan is always switched on and it is possible to select its desired speed by pressing the
key “ FAN ” on the remote control or the key on the control panel.
The fan speed is displayed as indicated in paragraphs “3.1” (point SW7) and “3.2” (point D7).
d . The temperature set-point is included between 17°C and 30°C (from 62 F and 86 F) with 1°C variations
and it can be set using the keys +/- on the control panel or with the keys ▲ ▼ on the remote control.
e . After a certain time (maximum three minutes) after the activation of the operation mode, the heat pump
activates and the appliance starts delivering warm air.
f . Connect the condensation discharge pipe (paragraph 2.6.b)
3.11 - TIMER MODE
a
. This mode allows to program the switching on or the switching off of the appliance.
b
. The delay time can be set, activated and cancelled both from the remote control and from the control
panel.