Olimpia splendid CALDO SKY, Инструкция по установке, использованию и техническому обслуживанию

Страница: 42 / 236

EN - 18
ENGLISH
9.2 - Minimum power heating mode
With the appliance on in fan mode, press key
to activate the minimum heating
power . The LED lights up on the appliance display.
9.3 - Maximum power heating mode
With the appliance on in minimum power mode, press key twice to activate the
maximum heating power
. In addition to the LED
, on the appliance
display lights
up the LED too ( together ) .
If one of the heating modes has been activated, press the ON/OFF
button to turn the appliance off, the display starts the 30 sec-
onds countdown after which the appliance turns off.
9.4 - ECO mode (temperature setting)
Ambient temperature is shown on the display when the appliance is turned on.
When the appliance is on, pressing button
will cause the temperature value to
flash and the set temperature value to be shown.
Within 5 seconds, press buttons and to set the desired temperature (range:
18°C÷45°C - 1°C variations). To confirm the setting, please wait 5 seconds; the display
goes back to show ambient temperature.
If the set temperature is slightly higher than the ambient one (+1÷2°C), the minimum
power heating function activates automatically (
on ).
If the set temperature is greatly higher than the ambient one (>3°C), the maximum
power heating function activates automatically (
LEDs turned on).
If the set temperature is lower than ambient temperature, the appliance ends heating
function, after 30 seconds the fan stops (
LEDs flashing) and flap oscillation
stops (LED flashing).
The set temperature can be changed at any moment during functioning.