Olimpia splendid Bi2 WALL AR 1000, Инструкция по эксплуатации и техническому обслуживанию, Страница: 64 / 317

EN - 28
ENGLISH
MALFUNCTIONING CAUSE WHAT MUST BE DONE?
Cooling not very effective
Accumulation of dirt in the appli -
ance heat exchanger coil
Clean the heat exchange coil
Air filter dirty Clean the filter
Obstruction of the appliance inlet Eliminate the impurities to free
the air flow
Doors and windows open Close doors and windows
Exposure to direct sunlight Protect from solar rays via cur -
tains
Too many heat sources Reduce the heat sources
Outdoor temperature too high The conditioner cooling capacity
lowers (normal)
Heating not very effective
Outdoor temperature lower than
7°C
Use a heating device
Doors and windows partially
open Close doors and windows
Impossible to modify the fan
speed
Control that the MODE indicated
on the display is AUTO (automat -
ic)
If automatic mode is selected,
the conditioner automatically ad
-
justs the fan speed
Protection against hot air in cool-
ing mode Lower the inlet temperature in
cooling mode; increase the inlet
temperature in heating mode
Protection against cold air in
heating mode
The TEMP indicator does not
switch on
Control that the MODE indicated
on the display is FAN (ventilation) In ventilation mode, the tempera-
ture cannot be set
Do not try to repair the appliance by yourself.
If the problem has not been solved, please contact your local retailer or the closest
assistance service. Supply detailed information about the malfunction and the equip -
ment version.