Olimpia splendid B0921, Инструкция по установке и эксплуатации, Страница: 8 / 20

8
EN
7
DESCRIPTION OF THE DISPLAY
S1.
Detected ambient temperature (scale 0,1°C)
S2. Set ambient temperature
S3. “Heating” mode set
S4. “Cooling” mode set
S5. “Cooling” mode in use ( COOL ON )
Cooling mode and water valve set to ON.
S6. External water temperature sensor status indi-
cator
OFF (always off) if the external water temper -
ature sensor is disabled (default condition)
ON
(on) if the external water temperature
sensor is enabled and water temperature is
>30°C “in heating mode” or <20°C “in cooling
mode”.
Blinking if the water temperature sensor is
enabled but water temperature is not suitable
for the set operating mode or if it is faulty.
S7.
“
Setting
” mode
It lights up during setting phase of the desired
ambient temperature, then it turns off.
S8. “ Antifreeze ” mode
It lights up when ambient temperature is =<
5°C (the valve opens and “heating” function
activates) and turns off when temperature
raises =>8°C.
S9. “Heating” mode in use ( HEAT ON )
Heating mode and water valve set to ON.
S10.
Displays the selected fan coil fan speed:
HI = maximum speed
MED = medium speed
MIN = minimum speed
6
DESCRIPTION
- settings saving function in case of power failure,
- pump protection.
Normally used for commercial, industrial, civil buildings
and houses for heating and cooling or to check the fan
or the valve in fan coils.
ON Cool
°C
ON Heat
%
ON
Cool
S1
S6 S7 S10
S2
S3
S4
S5
The digital thermostat is equipped with the following
functions:
- visualization of ambient temperature
- adjustment of desired ambient temperature,
- “cooling” or “heating” modes setting,
- fan coil fan speed setting (Minimum/Medium/Maximum),
5
FEATURES
• Temperature setting range 5°C - 35°C
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
• Temperature setting variation ± 0,5°C
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
• Power supply 230VAC - 50Hz
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
• Fan relay ampere 8(5)A
• Valve relay ampere 3(2)A
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
• Protection class IP21
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
• Installation environment 0-50°C, 5-95% RH
characteristics (temp., humidity)
S8
S9