Olimpia splendid AQUARIA 14P, Инструкция по установке, использованию и техническому обслуживанию

Страница: 52 / 142

ENGLISH
EN - 22
6 - TECHNICAL DATA
Consult the data plate applied to the product (Fig. 2) for the technical data listed below:
- Supply voltage
- Absorbed power
- Insulation class
- Appliance weight
7 - TROUBLE SHOOTING
BEFORE CALLING FOR SERVICE
Before contacting professional service, consult this list.
This list includes common occurrences that are not the result of a defect in workmanship or materials.
Low temperature operation with Auto Defrost function
The appliance is equipped with an automatic defrost function (indicated by the specific led “L3” switching
on) which, thanks to opportunely timed intervals and by checking room temperature, adjust the machine
operation.
PROBLEM POSSIBLE CAUSES ADVISED SOLUTIONS
The unit doesn’t operate.
The supply cord is disconnected. Insert the plug in the power socket and
make sure there’s electrical voltage.
The tank full warning led is turned on
(tank full or not correctly positioned).
Drain water tank and reset your setting,
or replace the water tank to right place.
Room temperature exceeding the
maximum work conditions of the
appliance.
Self-Protection designed to protect
the unit. Can not work under such
temperature.
Compressor protection is active (the
unit cannot work).
The dehumidifying
function doesn’t work
or the unit turn on / off
frequently.
Filter is clogged.
Filter damaged.
Clean the filter .
Replace the filter.
Door or window open. Close the door and/or the window.
The air inlet/outlet grilles are clogged. Remove the obstruction or clean the air
inlet/outlet grilles.
The room is too large or there’s too
much humidity.
If possible, remove or reduce the level
of humidity.
Operation is noisy.
The unit is tilted or unsteady. Place the appliance on an even, solid
surface (less vibration).
Filter is clogged.
Filter damaged.
Clean the filter .
Replace the filter.
The display shows E1. Temperature sensor faulty. Call the service center.