923424003_09_004
923424003_09_004
923424003_09_004
Installation Methods
Installation Instructions
1
2
3
3
5
4
INSTALLATION
To install the luminaire follow the installation procedure as described bellow.
ΑΤΤΕΝΤΙΟΝ!!!
1. Operations for installation, maintainance or testing must be done by
authorized personel, only when the device is disconnected from the mains
power supply.
These luminaires are used in places where emergency luminaires (CBS) are
needed.
Each luminaire must be permanently connected to mains power supply.
2. The device must be connected to the mains power supply through a fuse
dependent by the total amount of the line’s power load.
N
for neutral,
L
for live and for
ground.
Package Contents
General
The luminaire can be installed in 2 different ways. It can be installed either at
the ceiling or hanging with eye bolts. All mounting accessories are including in
the package.
A
Ceiling
mounting
B
Hanging installation
with hooks
Ceiling Mounting
1
2
Mind the orientation of placement
!!
The top cover placement is achieved
according to the bottom part of the
luminaire and the already installed
pictograms.
Changing Pictograms
1
2
P l a c e t h e a p p r o p r i a t e
pictograms according to the
position of the luminaire.
Firstly, remove the retaining
plastic clip.
Install the pictogram and make
sure it goes all the way down.
Remove the protective films
from both sides of the acrylic
plate and install it in front of
the pictogram. Mind the
orientation of the acrylic plate.
Place the plastic retaining
clip, press until you hear click
sound. Follow the same steps
for the remaining sides of the
pictogram.
3
4
1
1
4
1
1
Luminaire (Housing)
Mounting accessories
Manual
Set of 5 pictograms (U, D, R, L, B)
Acrylic Plates
