OLIMEX STM32-H107, Руководство пользователя

Страница: 3 / 17

STM32-H107
board use ARM-based 32-bit microcontroller
STM32F107VCT6
with
these features:
–
Core: ARM 32-bit Cortex™-M3 CPU
–
72 MHz maximum frequency, 1.25 DMIPS/MHz (Dhrystone 2.1)
performance at 0 wait state memory access
–
Single-cycle multiplication and hardware division
–
Memories
–
256 Kbytes of Flash memory
–
64 Kbytes of SRAM
–
Clock, reset and supply management
–
2.0 to 3.6 V application supply and I/Os
–
POR, PDR, and programmable voltage detector (PVD)
–
25 MHz crystal oscillator
–
Internal 8 MHz factory-trimmed RC
–
Internal 40 kHz RC with calibration
–
32 kHz oscillator for RTC with calibration
–
Low power
–
Sleep, Stop and Standby modes
–
VBAT supply for RTC and backup registers
–
2 × 12-bit, 1 µs A/D converters (16 channels)
–
Conversion range: 0 to 3.6 V
–
Sample and hold capability
–
Temperature sensor
–
up to 2 MSps in interleaved mode
–
2 × 12-bit D/A converters
–
DMA: 12-channel DMA controller
–
Supported peripherals: timers, ADCs, DAC, I 2 Ss, SPIs, I 2 Cs and
USARTs
–
Debug mode
–
Serial wire debug (SWD) & JTAG interfaces
–
Cortex-M3 Embedded Trace Macrocell™
–
80 fast I/O ports
–
80 I/Os, all mappable on 16 external interrupt vectors and almost all 5
V-tolerant
–
10 timers
–
four 16-bit timers, each with up to 4 IC/OC/PWM or pulse counter and
quadrature (incremental) encoder input
Page3