OLIMEX STM32-H107, Руководство пользователя

Страница: 10 / 17

Default state is open.
INPUT/OUTPUT
Status LED1 (green)
with name
STAT1
connected to STM32F107VCT6 pin 63
(PC6/I2S2_MCK/TIM3_CH1).
Status LED2 (yellow)
with name
STAT2
connected to STM32F107VCT6 pin 64
(PC7/I2S3_MCK/TIM3_CH2).
Power-on LED (red) with name PWR – this led shows that +3.3V is applied to the
board.
User button
with name
WKUP
connected to STM32F107VCT6 pin 23
(PA0/WKUP).
Reset button
with name
RESET
connected to STM32F107VCT6 pin 14 (NRST).
CONNECTOR DESCRIPTIONS
JTAG:
The JTAG connector allows the software debugger to talk via a JTAG (Joint
Test Action Group) port directly to the core. Instructions may be inserted and
executed by the core thus allowing STM32F107VCT6 memory to be programmed
with code and executed step by step by the host software.
For more details refer to IEEE Standard 1149.1 - 1990 Standard Test Access
Port and Boundary Scan Architecture and STM32F107VCT6 datasheets and users
manual.
Pin # Signal Name Pin # Signal Name
1 3.3V 2 3.3V
3 TRST 4 GND
5 TDI 6 GND
7 TMS 8 GND
9 TCK 10 GND
Page10