OLIMEX STM32-E407, Руководство пользователя

Страница: 30 / 33

OLIMEX© 2018 STM32-E407 user's manual
J,
22.03.18
Improved the information about how to program via
Arduino; added notices about Arudino programming
23
K,
12.09.18
Fixed a wrong pinout in the UEXT table. Added info
about hardware revision F.
15
10.2 Hardware revision
Revision Revision notes
B1 Initial release
C
FET1 removed; the TVS symbol fixed (both near the input power).
It is unidirectional and helps with the data protection.
D The PHY was changed and all libraries were updated.
E
1. R5 was changed from 10k/1% to 10k;
2. R70(0R) was changed to 10k and renamed to R13, added was
C26=10uF/6.3V and RST connection was removed from the PHY!;
3. SD/MMC package was changed to the newer version (much more
universal);
4. WKUP and RESET packages were changed to WS-
TAKT_6X3.5_SMD_NOCREAM;
5. Everything is renumbered, so there are no missing numbers.
6. C4 was changed from 100nF to 10uF/6.3V;
7. Added is R54 = 47k pull-up to Rx line;
F
1. Fixed JMP names – B0.1/B0.1 and B1.1/B1.1 to B0.1/B0.0 and
B1.1/B1.0
2. CD1 with new package 5032 50 MHZ 25ppm 3V.
3. SD card connector new type TFC-WPAPR-08.
4. Changed the bottom double USB key with two SY6280.
5. Changed a lot of electrolyte capacitors with 47uF/6.3V
6. Replaced 200mA ferrite beads with 2A ones; L2 also changed to
FB0805/600R/2A
7. MP1482DS dc-dc replaced with MP1584EN(SOIC8E).
8. Added LAN shielding capacitor.
9. R31 and R21 changed to 1.1K (up from 549R).
10. R50 and R26 changed to 2k (up from 1k)
Page 30 of 32