OLIMEX AVR-ISP500-TINY, Руководство пользователя

Страница: 4 / 20

SUPPORTED MICROCONTROLLERS:
The following AVR microcontrollers are supported for programming:
-
Classic 8-bit AVRs
(see the notes for Mass Storage Mode)
.
- megaAVR
- tinyAVR
- USB AVR
The following AVR microcontrollers are
not supported
:
- XMEGA
- AVR32
The following programming methods are
not supported
:
- JTAG
- debugWire
- Parallel High Voltage Programming
- Serial High Voltage Programming
- PDI
CONNECTOR SCHEMATICS:
POWER SUPPLY:
Normally the programmer is supplied from USB. For autonomous operation
user must power the programmer by providing 5V DC stabilized power
supply to the USB connector, as shown on the figure below.
ICSP10
pin Abbrev. description
1 MOSI Serial Output
2 V_TAR Target VCC
3 CLKO Clock output
4 GND Ground
5 TRST Target RESET
6 GND Ground
7 SCK Serial Clock
8 GND Ground
9 MISO Serial Input
10 GND Ground
ICSP6
pin Abbrev. description
1 MISO Serial Input
2 V_TAR Target VCC
3 SCK Serial Clock
4 MOSI Serial Output
5 TRST Target RESET
6 GND Ground