OLI eLINE 880876, Руководство пользователя

Страница: 5 / 60

55
EN
DE
RU
4 - BEFORE ASSEMBLY
Before the start of the installation you should fully read and understand the assembly instructions supplied with
the product.
The system should be assembled, installed and connected only in accordance to these instructions.
Before installing your system, confirm the compatibility of the installation at www.oli-world.com.
When planning and installing sanitary equipment, local, national and international regulations and standards
should be observed and respected.
Examine the content of the product before beginning the assembly to check if it is complete or check for any
damages.
A product that is incomplete, damaged or has detectable faults should not be assembled. No liability will be
accepted for damage caused by innapropriate transportation or temporary storage.
If you wish to install this product’s Bluetooth accessory, please make sure you follow the correct
installation methodology available at page 15.
5 - ON-SITE ASSEMBLY CONDITIONS
Pressure 0,5bar to max of 10,0 bar.
Grid voltage
110-240V AC/50-60Hz with a main switch for all poles connected to the mains with a contact opening
capacity of 3mm.
Avoid direct exposure to sunlight.
Unobstructed space of 1200mm.