OLI DMV-E, Технический каталог

Страница: 17 / 20

EN
DMV-E
T. 17
REV.00 | 04/2022
10. DECLARATION
Medolla 13/01/2014 General Manager
Giorgio Gavioli
1.1.1. - 1.1.2. - 1.1.3. - 1.1.5. - 1.3.1. - 1.3.2. - 1.3.3. - 1.3.4. - 1.3.7. - 1.3.8. - 1.3.9. - 1.4.1. - 1.5.1. - 1.5.2. - 1.5.4. - 1.5.5. - 1.5.6. - 1.5.8. - 1.6.1. - 1.6.4. - 1.7.1. - 1.7.2. - 1.7.3. - 1.7.4. -
1.7.4.1. - 1.7.4.2. - 1.7.4.3.
OLI SpA undertakes to transmit by mail or e-mail, in response to a reasoned request by the national authorities, relevant information on the products mentioned on the present
declaration, except for intellectual properties of the producer. The technical documentation is kept at OLI SpA, Via Canalazzo, 35 – 41036 Medolla (MO) Italy
The motor DVM-E is manufactured in conformity with the following directives:
∙2006/42/EC ∙2006/95/EC ∙2004/108/EC
The conformity has been verified according to the conditions included in the following standard documents:
· EN 12100-1 · EN 12100-2 · CEI EN 60745-2-12 · CEI EN 60745-1
DECLARATION OF INCORPORATION
According to the Machine Directive 2006/42/EC the family of DVM-E over mentioned are identified as “PARTLY COMPLETED MACHINERY”
“B” Type:
» These products, DVM-E are manufactured according to 2006/42/EC AND SUBSEQUENT AMENDMENTS
» These products must not be put into service until the final machinery into which it is to be incorporated has been declared in conformity with the
provisions of this Directive, where appropriate.
According to Annex II B of Directive 2006/42/EC machines, the following essential requirements of safety and health protection are applied and respected:
conform with the following directive listed on the following declaration.
Declare that
DVM-E
series:
EU DECLARATION OF CONFORMITY
OLI SPA
Via Canalazzo, 35 - 41036 Medolla (MO) - ITALY