OLI DMV-E, Технический каталог

Страница: 11 / 20

EN
DMV-E
T. 11
REV.00 | 04/2022
4.3 COMPACTING THE CONCRETE
Warning! Check that the ON/OFF‐switch is switched OFF and not connect the plug yet.
Caution! Check that the flexible shaft joint nut is well fastened to the motor.
Caution! Check that the poker is well fastened to the flexible shaft.
1. Put the plug into a socket.
2. Place the motor and shaft in direct vicinity and put the flexible shaft and poker into the concrete.
3. Switch the ON/OFF‐switch ON, to the position I.
4. Compact any area about 5 ‐ 6 seconds until no more air bubble comes out and just liquid concrete floating on surface.
5. Move to the following places that is about 8 ‐ 10 times of the diameter of poker size, and continue compacting (repeat action 2 ‐ 4).
6. Take the flexible shaft and poker out of the concrete and switch off the motor.