THE BASICS
ABOUT YOUR CAMERA
Looking after your
Waterproof Case
Your protective waterproof case is the key to having a
long and successful relationship with your camera.
Our cases will protect your camera, but they’re not completely
indestructible. Check your case for hairline fractures and cracks
before each use. Cracks mean it won’t be waterproof, and water
damage is not covered under warranty, so please test your case in
water before putting your camera in it, each and every time.
For full instructions on looking after your case,
See page 27 – Waterproof Case Care.
Applying 3M
Adhesive Mounts
Ensure adhesive mounts are applied to clean,
smooth surfaces at room temperature. We
strongly advise leaving them for 24 hours
before first use for optimum strength. To
remove, apply gentle heat with a hairdryer to
the mount, and peel off.
Do not
apply heat direct to the camera itself.
What’s Included:
1-
3M Flat Base Mount,
2-
3M Curved Base Mount,
3-
Olfi one.five,
4-
Protective Waterproof Housing,
5-
Long Arm 90° Connector,
6 and 7-
Screws x3 (one on Waterproof Case),
8-
Frame Housing,
9-
Rubber Anti-Vibration Locking Plug,
10-
Short Arm 90° Connector,
11-
Short Clip Mount,
12-
Reverse Tripod Adapter,
13-
J Hook Vertical Surface Mount,
14-
Quick Start Guide,
15-
Micro USB Charging Cable,
16-
Olfi Stickers x3,
17-
Carry Case.
Changing Back Doors
The Olfi one.five comes complete with a waterproof case (sub-
mergible to 30m). However, there is an Audio Enhancing Back
Door available as an accessory. To change back doors, turn your
protective case upside down to put the mounting prongs facing
upwards, and the closing latch on your left. Put the door at a right
angle (90°) to the case and push outwards (right) with your thumb.
To fit the alternative back door, keep your case facing upwards
with the latch on your left, and insert the door from the right hand
side, at a 180° angle (flat) and listen out for the click. Always test
your case in water without the camera inside before every use!
TIP
To remove the MicroSD card from your
Olfi, simply push the SDcard inwards,
and it’ll spring out!
What’s Included:
1-
Micro USB Port
2-
Micro HDMI Port
3-
MicroSD card slot
4-
Shutter/Select button
5-
Top LED lights
6-
Power/Mode button (On/Off)
7-
Front LED lights
8-
Back LED lights
9-
Colour LCD Screen
10-
Scroll key (up)/Wifi
11-
Scroll key (down)/Quick Menu Access
4
5
