Modular Wireless I/O System – User Guide
10
b.
Connect Antenna. Radio Module is equipped with SMA (female) connector. For outdoor
installation, place a lightning arrestor between Antenna and Radio Module connection.
4.
Attach I/O Module(s) to the system.
a.
Place Modules in any combination (do not leave gaps between Modules).
b.
When using more than five (5) I/O Modules, determine maximum I/O Module combination by
using power budget calculator. CLICK HERE http://goo.gl/t67r3k
c.
Then, use the 16-position Switch located on the front of each I/O Module to set device ID(s).
Each pair of Modules must be set to its own ID for the system to function properly.
Chaque paire de modules doit être définie sur son propre ID pour que le système fonctionne
correctement.
5.
Attach the other End Terminal Bracket to secure the Modules (place it next to the last module without
leaving a gap).
Radio
SMA (F)
Lightning Arrestor
N (Female)
Antenna
N (F)
WARNING: Power must be disconnected or turn off prior to
attaching or removing any I/O Modules from the system – failure to
comply may cause damage to the I/O Module(s)
AVERTISSEMENT: L'alimentation doit être déconnectée ou éteinte
avant d'installer ou de retirer des modules d'E / S du système. Le
non-respect peut entraîner des dommages matériels.
Содержание Wio BM-0868-RM1
