User Manual LR-1BS35
OMEN-1BS35-202012
9
Set the Led on and off state of the lidar through the Led Marquee, and click Set Configs to confirm;
Set the on and off state of the lidar safety function through the Safe Area, and click Set Configs to
confirm;
Select current active safe bank input mode trough Safe bank input
（
GPIO mode is invalid in
1BS3/5
）
;
Set the mode of the radar's Led light through Led Mode;
Select current bank through Safe bank config when Safe bank input is “Software”;
Set the IP address and port of the PC receiving LiDAR data through Host IP & Port. Up to 3 groups
of Host IP & Port can be set. Click
to add a group, click
to delete a group.
Enable/disable the DHCP function: the lidar dynamically obtains an IP address from the DHCP
server (ON), and the lidar needs to set up a static IP address (OFF);
Modification of lidar IP: Enter the new IP into the lidar IP column (must be in the same network
segment as the local IP), click the Set Network button to confirm, and the modification is complete
after the LiDAR is powered on again.
Figure 11 Parameter configuration of web page
