6-18
Then, without shutting off the engine, follow these steps:
The dipstick is located
toward the rear of the
engine compartment.
See “Engine
Compartment
Overview” in the
Index for more
information
on location.
1. Flip the handle up and then pull out the dipstick and
wipe it with a clean rag or paper towel.
2. Push it back in all the way, wait three seconds and
then pull it back out again.
3. Check both sides of the dipstick, and read the lower
level. The fluid level must be in the COLD area,
below the cross
-
hatched area, for a cold check or in
the HOT area or cross
-
hatched area for a hot check.
4. If the fluid level is in the acceptable range, push the
dipstick back in all the way; then flip the handle
down to lock the dipstick in place.
Содержание Bravada 2001
Страница 1: ......
Страница 359: ...7 52 Maintenance Record DATE ODOMETER READING SERVICED BY MAINTENANCE PERFORMED...