3 of 14
INTENDED FOR OTHER THAN HOUSEHOLD USE
OVEN MUST BE KEPT CLEAR OF COMBUSTIBLES AT ALL TIMES
IMPOR
IMPOR
IMPOR
IMPOR
IMPORT
T
T
T
TANT INSTR
ANT INSTR
ANT INSTR
ANT INSTR
ANT INSTRUCTIONS
UCTIONS
UCTIONS
UCTIONS
UCTIONS
After the gas supply has been connected to your unit, it is extremely important to check piping
for possible leaks. To do this, use soap and water solutions, or solutions which are expressly
made for this purpose. DO NOT USE matches, candles, flames, or other sources of ignitions
since these methods are extremely dangerous.
In a prominent location post instructions to be followed in the event you smell gas. Obtain these
instructions from your local gas supplier.
FOR
FOR
FOR
FOR
FOR Y
Y
Y
Y
YOUR SAFETY
OUR SAFETY
OUR SAFETY
OUR SAFETY
OUR SAFETY
Do not store or use gasoline or other flammable vapors
and liquids in the vicinity of this or any other appliance.
WARNING
WARNING
WARNING
WARNING
WARNING
Improper installation, adjustment, alteration, service or maintenance can cause property damage,
injury or death. Read the Installation, Operating and Maintenance Instructions thoroughly before
installing or servicing this equipment. Initial heating of oven may generate smoke or fumes and
must be done in a well ventilated area. Overexposure to smoke or fumes may cause nausea or
dizziness.
NOTE: Only Pizza and Bread Products can have direct contact with the deck. All other food
products must be placed in cast iron pans or suitable metal pans avoid direct contact with the
deck. Otherwise commingling of product and flavors will happen. Metal screens can be used, but
marring will occur on the steel deck. This equipment has been engineered to provide you with
year round dependable service when used according to the instructions in this manual and standard
commercial kitchen practices
As a safety precaution, disconnect the power supply to
the appliance before cleaning or servicing this appliance.
Instruction Plate
:
Before lighting this piece of equipment, ensure
that the ventilation hood is turned on
.
1
. Pull E-stop switch;
2
. Turn on power switch;
3
. Press the
preheat button on the display panel;
4
. Lower and upper burn-
ers will light. In case of flame failure, reset the alarm(s) and
wait five minutes before relighting the appliance.
