1. The PIR sensor shall always be tilted slightly downward.
2. The orientation angle of the sensor shall be between 0-45°.
3. The detection distance of the sensor is the farthest when the ambient temperature is 25
℃
.
Any temperature fluctuations above or below 25
℃
will affect the detection distance.
4. If the light continues to detect motion while it is on, it will remain on until the motion stops.
NOTE:
OPERATION INSTRUCTIONS
Detection Range: 180°
4
0°
45°
180°
ON
M
1M
L
H
10S
10M
D2D
5M
30S
1
2
3
1.The function knob is divided into 5 gears
L: Low sensitivity, sensing distance is 4-6 meters.
D2D: Light control mode, automatically turn the light on/off
depending on the ambient brightness.
M: Medium sensitivity, sensing distance is 6-10 meters.
ON: Constant light mode: the light will always be on after
being powered on, and won’t switch on/off automatically.
H: High sensitivity, sensing distance is 10-15 meters.
2.Can identify day and night: The consumer can adjust work
ambient light. It can work in the daytime and at night when it is
adjusted on the “+” position (max). It can work in the ambient
light less than 10LUX when it is adjusted on the “−” position
(min).
3.Time-delay adjustment: It can be set according to the consumer’s
desire, there are five gears: 10 seconds / 30 seconds / 1 minute / 5 minutes / 10 minutes.
Time-delay is added continually: When it receives the second induction signals after the first
induction, it will compute time once more on the rest of the first time-delay basic (set time).
