PEC Flaw Detector PE4332 Operation Manual
+7(812) 385-54-28
16
Figure 15. Device calibration window
The numbers are entered as follows:
select any digit place using
functional keys; the icon of the
highlighted digit position will change to
,
change value from 0 to 9 for each digit position selected using the
keys,
If necessary, you can set the digit position value by pressing on the
keys.
Grid
When you use the scan mode, you shall put a measuring grid to the test item.
We propose to use our special self-adhesive film with a grid. You can also draw the grid
on the test item by yourself using, for example, a ruler and a marker. Figure 16 shows
the window for grid parameters setting.