29
Tip 15
►
Okolab recommends using a certified thermometer as external reference
8.2.3
Data Logging
H401-T-CONTROLLER is equipped with local memory to store the temperature and calibration data on
its internal memory. These data can be then downloaded on a USB stick at user request. In order to activate the
logging, follow the steps indicated below:
1
Press on
Logging
icon
and flag
Internal memory
in the page that appears, see Figure 39.
Tip 16
►
When activating the logging on the internal memory, you can access the Logging page also by
pressing the activated logging icon
on the Homepage, as shown in Figure 40
a
b
Figure 39. Logging. (a) How to enter in the logging menu; (b) logging in internal memory
Figure 40. How to access the Logging page from the Homepage
2
Press on the icon
to insert the logging time, see Figure 41. You can change this time in the range 1-60
seconds.
