H301-MINI
User Manual
Rev 02
www.oko-lab.com
Pa
ge
4
2.
Sample Holders
2.1
Available Sample Holders
The following sample holders are available.
NOTE:
Please contact
if you cannot find the sample holder you are looking for. We are constantly
adding new inserts to the list.
1x35-M single
#1 35mm Petri-dish
1xGS-M single
#1 1x3in. chamber slide
1xLABTEK-M single
#1 Lab-Tek 1in.x2in. chambered cover glass
1xLABTEK-II-M single
#1 Lab-Tek II 1in.x2in. chambered cover glass
1x60-M-single
#1 60mm Petri-dish
1x35-M single
For #1 35mm Petri-dish holder
1x60-M single
For #1 60mm Petri-dish holder
1xGS-M single
For #
1 1”x3” c hamber slide holders
1xLABTEK-M single
For
#1 1”x2”
Labtek
c hambered cover glass holder
1xLABTEK-II-M single
For #
1 1”x2”
Labtek II
c hambered cover glass holder
Figure 2.Available sample holders.
3.
Insertion of the Sample Feedback Temperature Sensor
Insert the Sample Feedback Temperature Sensor through the dedicated opening located in the H301-MINI (see Figure 3,
Frontal and 3D views).
1.Frontal view
2.3D view
Temperature Sensor dedicated opening
Temperature Sensor dedicated opening
Figure 3. Insertion of the temperature sensor inside the chamber
