9 / 22
3.1 CONTROL UNIT
Sensitivity
Knob
Loop for
Carrying Strap
Search Coil
Socket
Charger
Socket
Charging LED
Charger Socket / Charging LED:
When the internal battery is too low – which is signaled by a low
triple tone at increasingly shorter intervals – you have to recharge it by connecting the appropri-
ate Power Charger to the Charger Socket. As long as charging is in progress, the Charging LED
is
orange
. As soon as the Charging LED turns off, the battery is fully charged. Complete details
about charging the unit you will find in chapter "4.1 Charging the Control Unit" on page 13.
Search Coil Socket:
Plug the Connector of the Search Coil into this socket before using the de-
tector. No matter if you are using the standard Search Coils or the Frame Coil, this is the place
where it gets connected.
Slider Plate:
This part is used to mount the Control Unit to the Telescopic Rod. Thanks to the
embedded magnet, the Control Unit will keep in place when attached. Read chapter "4.2 Mount-
ing the Control Unit" on page 14 to learn more about assembling and disassembling the Con-
trol Unit to the Telescopic Rod.
Headphones Socket:
If you don’t want to use Bluetooth Headphones you can also use wired
headphones by plugging them into the Headphones Socket. As soon as the headphones are
connected, the internal speaker will be disabled.
Loop for Carrying Strap:
When using the Frame Coil it is recommended to detach the Control
Unit off the Telescopic Rod and attach the Carrying Strap instead. To do so, simply hook the
carabiner into both loops and carry the unit around your neck (see chapter "4.6 Assembling the
Frame Coil" on page 17).
Slider Plate
with Magnet
Headphones
Socket
Power Button
with Operating LED
Loop for
Carrying Strap
Volume
Knob