Introduction
7
1.2 Important Notes
Prior to using the Bionic X4 and its accessories, please read these operating instructions carefully.
These instructions give information on how to properly use the detector and potential sources where
precautions should be taken.
1.2.1 General Notes
Being an electronic device, the Bionic X4 has to be treated with caution and treated with care as with
any electronic device. Any failure to observe the safety precautions given or any use for purposes other
than the ones it is designed for may result in damage or destruction of the processing unit and/or its
accessories or connected components.
The device has a built in anti-tampering module which will destroy the unit if it is improperly opened.
There are no end user serviceable parts on the inside of the unit.
1.2.2 Surrounding Area
When moving this unit from a cold place to a warmer place, watch out for condensation. Do not
immediately operate the unit until any possible condensation has evaporated. The unit is not weather
proof and water, moisture or condensation can destroy the unit.
Avoid strong magnetic fields, which may occur in places where there are large electric motors or
unshielded loudspeakers. Try to avoid using this equipment within 50 meters (150 ft) of this type of
equipment.
Avoid using this equipment around active military installations and airports or where there may be other
devices that may hamper the signals received. Radars for aircraft, boats and weather reporting may
lower the units capabilities.
1.2.3 Voltage / Power Supply
The power supply should not be outside the indicated range of values. Use only approved chargers,
batteries and rechargeable batteries which are included in the scope of delivery.
Never use the 115/230 Volt mains supply.
1.2.4 Maintenance and Services
In this section you will learn how to maintain your measuring instrument with all of its included
accessories. This will keep it in good condition a long time and you will be able to get good measuring
results.
The following list indicates what you absolutely should avoid:
OKM GmbH
