Oklin GG02, Руководство пользователя

Страница: 8 / 17

6
Installation
Installation 3 – Hose Into Pipe Work Under Sink
Note: This should be done by a licensed plumber.
If there is no suitable unused spigot available in the
existing pipe work under the laundry or kitchen sink,
install a section of pipe with an upward facing spigot
immediately after the vapour trap as shown.
Insert the hose into the spigot and secure. The hose
should rise above the level of the pipe bend to minimize
the possibility of water returning to the unit.
Setting Up For First Time Use
1. Ensure the unit is on a stable surface and the exhaust hose is properly connected.
2. Empty the two bags of organic starter material into the tank.
3. Pour 3 litres of cold or warm tap water into the tank.
4. Plug the unit into the power supply and turn on at the wall.
5. Close the lid. The power indicator will be illuminated.
6. Leave the starter material to establish itself for at least 24 hours before putting in any
food waste.
7. The unit will take approximately 1–2 weeks to reach its normal operating efficiency.
8. Start gradually, adding only up to 1kg of food waste per day in the first week. Gradually
increase amounts per day in the second week up to 2 kgs per day. From there on
gradually increase up to full capacity of up to 4kg per day.
*See below start up schedule for more details