Oklin GG02, Руководство пользователя

Страница: 6 / 17

4
Installation
Before You Begin Installation
This unit is best installed indoors.
If outdoor installation is unavoidable,
• protect from rain, water and direct
sunlight;
• maintain temperature between 0⁰C and
40⁰C.
Install on a flat, solid, level surface. If necessary,
use the levelling wedge to prevent the unit from
rocking on a sloping surface.
Allow a 10cm gap between the unit and any side
or rear wall.
The unit connects to your normal household electricity supply. Ensure there is a properly
earthed 3-­‐pin power outlet nearby.
Record the serial number on the front page of this manual. The serial number can be found on
the printed plate at the rear of the unit (see diagram below).
Connect The Exhaust Hose (See options on page 6 & 7)
Attach the hose to the outlet on the rear of the unit using the elbow provided.
Terminate the exhaust hose as closely as possible to the air outlet. Keep the number of bends to
minimum. If the overall length exceeds 2 meters, check for leaks. Ensure the hose continuously
slopes along its entire length. If there are dips in the hose, moisture may accumulate and block
the exit of vapours.