System Setting
In system setting menu, you can modify operation and
display setting, such as dome label, temperature and
display of various value on the operational screen.
EDIT DOME LABEL
LABEL
：
ENTRANCE
BACK
EXIT
I N I T I A L I N F O
SPEED DOME V1.00
PROTOCOL：FACTORY
DOME ADDRESS：001
COMM：4800,N,8,1
BACK
EXIT
6.OSD - System Setting
6.OSD - Motion, Clear
Initial information:
Shows the information about current setting.
Dome Label:
1. use UP or DOWN to change the charactor.
2. use RIGHT to move to next char.
3. use RIGHT to move to last char and save.
4. use Left to first char and cancel.
Display setup
Actuvate the display for the on-screen info in operaton
mode.
Dome label:
the name of dome
Preset label:
shows the labe of every preset
Zoom label:
shows zoom factor on screen
Zone label:
shows the zone name
Direction label:
shows the coordinates
Temperature label:
shows the cur. temp in the speed dome
DISPLAY SETUP
DOME LABEL
OFF
PRESET LABEL
OFF
ZOOM LABEL
ON
ZONE LABEL
OFF
DIRECTION LABEL
ON
TEMPERATURE
LABEL
OFF
BACK
EXIT
Some products may not be available in your country, please contact our distributor for more details
Some products may not be available in your country, please contact our distributor for more details
13
14
SYSTEM SETTING
EDIT DOME LABEL
INITIAL INFO
DISPLAY SETUP
MOTION
CLEAR
PASSWORD SETUP
CLOCK SETTING
BACK
EXIT
M O T I O N
Motion
control
AUTO FLIP
: Auto. Image flip in tilt range from 90° to 180°
PROPORTIONAL PAN:
depends on the zoom factor, the
dome will adjust the pan and tilt speed automatically for
comfortable viewing.
PARK TIME:
defines the idle time prior to start a custom
defined action( park action).The range is from 1 to 240
minutes. This function can be deactivated by setting the
minute to 0.
PARK ACTION:
the action which will be started after the
idle time (park time). Selectable between Preset, Scan,
Pattern (Nr), Tour or None.
POWER UP ACTION:
defines the action which will be
started after power up and self test. Selectable between
Auto,Preset 1, Scan, Pattern (Nr), Tour or None. By
selecting Auto, the dome will resume the last action
before power off.
EIS ENABLED:
Elctronic Image Stablizer.
PRESET FREEZE:
AUTO FOUCS:
adjust the image focus.
DEFOGGER:
when the temperature arrive the setting
degree, the heater will be open.
HEAD UP:
flip the image.
Freezes
image
when
moving
between
presets
in
tour.
AUTO FLIP
ON
PROPORTION PAN ON
PARK TIME
005
PARK ACTION
SCAN
POWER UP ACTION AUTO
FAN ENABLED 040
TEMP C/F CENT
ADVANCE SETTING
BACK
EXIT
Clear
You can clear setting’s memory or reset the camear to
factory default. The follwing functions are supported:
- Clear Zones
- Clear all presets
- Clear all patterns
- Clear all tours
- Clear all windows
- Factory defaults
Warning
:
The clear action can not be undone.
once a item is cleared it is impossible to
retrieve the deleted setting. Please make sure
that the requested clear action is desired.
C L E A R
CLEAR ALL ZONES
CLEAR ALL PRESETS
CLEAR ALL PATTERNS
CLEAR ALL TOURS
CLEAR ALL WINDOWS
FACTORY DEFAULTS
RESTART
BACK
EXIT
O
NEW PASSWORD : ******
CONF PASSWORD : ******
ENABLE PASSWORD OFF
BACK
EXIT
LD PASSWORD : ******
PASSWORD SETUP
Password setup
You can change password to access the OSD menu.
Default Password is 000000.
TIME
00:00:00
DATE
01/01/01
DAY
MON
BACK
EXIT
CLOCK SETTING
Clock setting
Some function like Auto-Tracking require the timer for
activation.
Time:
HH:MM:SS
DATE:
YY/MM/DD
DAY:
MON-SUN
ADVANCE S E TTING
EIS ENABLED N/A
PRESET FREEZE OFF
AUTO FOUCS OFF
DEFOGGER 015C
HEAD UP OFF
BACK
EXIT
